Traditional Standing seam

Traditional standing seam trays can be installed to roofs, façade and soffit areas and should be fixed to a fully supported deck using stainless steel cleats. The substrate may be a ventilated timber deck, Rigid PIR Insulation onto a plywood or concrete deck, Composite metal faced insulation board or in high humidity locations Cellular Glass may be required. The standing seam has a traditional appearance popular with both architects and specifiers.

The standing system can be fabricated in the following materials;

  • Zinc
  • Copper, Brass and Bronze
  • Stainless steel
  • Coated steel
  • Coated aluminium

Due to the highly skilled detailing requirements, it is recommended this system is installed by fully trained and competent installers only.

Maximum sheet length:

Continuous rolled and restricted by manufacturer recommendations

Maximum sheet width:

600mm (Narrower centres can reduce oil canning)

Material thickness:

0.4mm – 0.8mm

Substrates:

Timber, PIR Insulation, Composite Insulation Board & Cellular Glass

System type:

Fully weathered system